RC Li-xx battery protector is using the parallel charge lead to monitor the status of each cell during the discharging period, and then control the throttle to protect Li-Po pack to be over discharged, extend the cycle life of Li-Po pack!!RC Protector also has low voltage detection. It will reduce the throttle signal when the voltage is running low to inform user preparing save landing!!
Function: Automatically detect 2~4 cell Voltage via parallel charge lead. 4 LED display the status of each cell. Green LED (Normal). Diam: 47mmx30mmx6mm
Flashing Green LED (3 time/sec) mean low voltage and the voltage will stay at 3V until reconnect BEC lead or power to re-detect the cell voltage.
The protection function will start when battery voltage is low and reduce the throttle or cutoff the power.
Overheat protection – when the temperature higher than 60℃(device has to be attached with battery);The program will jump to low voltage mode. The protector has to be re-connected; otherwise it will stay in low voltage mode.
BEC and Parallel charge lead short circuit protection.