LETON Melody ESC Program Card (Suitable for LETON ESC)
Name:LETON Melody ESC Program Card (Suitable for LETON ESC)
AUD$12.00 Sale: AUD$5.76
Use all of the functions your Melody controller has to offer. This optional programming card expands the flexibility of the Melody controllers without adding complexity.
Dead simple to operate - Simply set the dip swtiches to your desire, plug the controller into the card and hook up the battery you would normally use for flight. The controller will beep and you are done.
* Auto or Manual Settings * Selectable Brake (On/Off) * Inrunner (low timing) or Outrunner (high timing) modes * High (70%) or Low (60%) Voltage Cutoff * 8 Melodies at startup * Soft (Heli or Gearox) or Hard (Direct Drive) Start Modes * Instructions included
There are 8 switches on the program card. 1 to 5 are program setting. 6 to 8 are music setting.
SW1: When SW1 at the position “ON” is Manual setting, “OFF” is Auto setting. Manual setting – allow user to set up their own setting by select SW2 – SW5.
Auto setting – There is no function between SW2 - SW5. The ESC will automatically set at 1. Non-brake. 2. Multiple pole start 3. High Voltage cut-off mode (70%) 4. Fix-wing start mode
SW2: When SW1 is “ON”, SW2 could set up ‘Brake’ or ‘non-Brake’. ‘ON’ – Brake ‘OFF’ – Non-Brake
SW3: When SW1 is “ON”. SW3 could set up for ‘Inline’ or ‘Out-runner’ motor. ‘ON’ – In-line brushless motor ‘OFF’ – out-runner Motor
SW4: When SW1 is “ON”. SW4 could set up the cut-off voltage to protect battery to be over-discharged. ‘ON’ – Low voltage cut-off (60%) ‘OFF’ – High voltage cut-off (70%)
SW5: When SW1 is “ON”. SW5 could set up for ‘Hard’ or ‘Soft’ start. ‘ON’ – Soft Start (Helicopter mode) ‘OFF’ – Hard start (Fix wing mode)
SW6 SW7 SW8 3 switches could make up 8 different melodies. 1 2 3 4 5 6 7 8 SW6 ON OFF ON OFF ON OFF ON OFF SW7 ON ON OFF OFF ON ON OFF OFF SW8 ON ON ON ON OFF OFF OFF OFF (When SW6 SW7 SW8 are all on is for melody off)