The ParkBEC 6V is the 6 volt output version of our ParkBEC, the smallest and lightest switch-mode BEC on the market. It weighs only 6.5g (4.4g without wires) and is designed for running parkflyer type aircraft with pack voltages up to 33.6V. It can support as many as six sub-micro servos. The 6 volt output option will give you more servo speed and torque than the 5v version, at the cost of somewhat increased power consumption.
It uses a switching type power supply to efficiently convert high pack voltages into a steady 6 volts. If you are using small servos, please make sure that they can be run from 6v. Some sub-micros, notably the Hitec HS-50, can be damaged by a 6v supply.
It is especially well suited for small helicopters and 3d planes, where extra response speed or torque are needed. The ParkBEC installs between your ESC and receiver. You don't have to modify your speed control to disable its internal BEC, just plug the ESC into the ParkBEC 6V. The ParkBEC 6V is designed for use with lithium aware ESCs. If your ESC does not have a setting for high voltage lithium packs, please use the Dimension Engineering SmartBEC which includes an integrated lithium cutoff to protect your flight pack.
For best results, ensure that the ParkBEC 6V is installed at least 2 inches away from your receiver.
Please Note: ParkBEC 6V is not compatible with our ServoSense product. If you are using a ParkBEC 6V and wish to measure the current drawn from the ParkBEC 6V in flight, please use our ServoSense Plus. Additionally, ParkBEC 6V is not compatible with 2s lithium packs.
Product Specs Model: ParkBEC 6V Specifications: Input voltage: 8V to 33.6v (3s-8s lithium, up to 21 NiMHs) Output current: 1.25A continuous, 1.5A 60 second peak. (6 4-9g servos, 4 17g or larger servos) Weight: 6.5g/.23oz Weight Without Wires: 4.4g/.16oz 6 Volt output Universal connector fits all receivers 1.3V dropout voltage at 1A Can be put in parallel
Applications: Parkflyers Small 3d aircraft Micro helicopters Robots